|
|
|
The PSS 625 is the PA Monster!
A front loaded 2-way system for music playback, and live
sound reinforcement, it features 2 x 15" cast frame woofer
coupled through a passive crossover network to a horn loaded
compression driver, to deliver high sound pressure levels.
(Crossover for the highs only, the lows operate independent
of crossover due to quick roll-off in mutual coupling of
the low frequency transducers)
The extremely rigid and thus roadworthy, 625 is carved out
of plywood. It may also be customized to operate in biamped
configuration.
It may be used as a stage speaker or stacked.
 |
|
| System
|
: |
Large
format PA monitor |
| Cabinet
|
: |
18mm
plywood front & rear
18mm plain particle boardsides |
| Transducer
Complements
|
: |
2
x 15” die cast framewoofer
1 x horn loaded compression driver |
| Input |
: |
Binding
post, Neutrik Speakon ® |
| Nominal
Impedance |
: |
4 Ohm |
| Freq.
Response (± 3 dB) |
: |
55
Hz ~ 17.5 kHz |
| Frequency
Range (-10 dB) |
:
|
45
Hz ~ 19.5 kHz |
| Sensitivity
(1w, 1m) |
: |
100
dB |
| Continuous
Power Handling |
: |
600
Watt |
| Crossover
Frequency |
: |
2
kHz |
| Grille |
: |
2mm
MS - black powder coated |
| Finish |
: |
Durable
grey carpet |
| Optional
Hardware |
: |
N.A |
| Dim.
(HxWxD) mm |
: |
915
x 500 x 415 |
| Weight
|
: |
80
Kg |
|
