|
The HA 3200 and HA 4000 are Class H designs in 2 RU. A newly developed switch mode power supply provides sustained high power during extended performance bursts. The design ensures a critical degree of control on the loudspeaker at high duty cycle.
These amplifiers incorporate extensive protection features to safeguard internal circuits and connected loads. With fault indicated, the amplifiers mute and the output conditions are rechecked after every 1 second, and latched after 10 seconds if the short circuit at output remains.
Rugged construction ensures road worthiness, and a modular design aids in quick and effective servicing.
The HA 3200 is the ideal amplifier for the CLA 72 and CS 2200. A single HA 3200 in bridged mode (2400 watt at 4 Ohm) should drive upto 4 CLA 72s. A single HA 3200 in bridge mode can also drive 2 x SC 2200.
|
· Refined Class H topology with SMPS
· Upto 3400 watts of rms power
· 2 RU and lightweight
· Symmetrical layout and even weight distribution
· Continuous performance at 2 Ohm (per channel) with 4 Ohm bridging
· Ground Lift, and Clip Limiter
· Balanced inputs and buffered attenuator
· Efficient front to back cooling through twin speed axial fans
· XLRs in and out. 'Twist to Lock' and binding speaker connectors
· Modular construction for easy servicing
· Rack ears for installation ease
· Protections:
· DC at output
· Excessive current at output
· High temperature
· Short circuit at load
· Mains fuse
· Soft start
|
DESCRIPTION
|
: |
HA 3200 |
|
|
CLASSIFICATION
|
: |
H Class |
H Class |
| POWER @ <1% THD: Single Channel 4 Ohm |
: |
1000 W |
1300 W |
| Both channel 4 Ohm |
: |
900 W / channel |
1150 W / channel |
| Single channel 2 Ohm |
: |
1500 W/ channel |
2000 W/ channel |
| Both channel 2 Ohm |
: |
1200 W/ channel |
1700 W/ channel |
| Bridged, 8 Ohm |
: |
1800 W |
2400 W |
Bridged, 4 Ohm |
: |
2400 W |
3200 W |
| FREQUENCY RESPONSE (- 3 dB) |
: |
10 Hz ~ 30 kHz |
10 Hz ~ 30 kHz |
| DAMPING FACTOR (re: 1 kHz, 8 Ohm) |
: |
> 400 : 1 |
> 400 : 1 |
| SLEW RATE |
: |
20 V/ m Sec |
20 V/ m Sec |
| S/N, A WEIGHTED |
: |
> 100 dB |
> 100 dB |
|
CROSSTALK |
: |
> 70 dB |
> 70 dB |
|
INPUT IMPEDANCE |
: |
20 kOhms |
20 kOhms |
INPUT SENSITIVITY (@ 4 Ohm) |
: |
1 V RMS |
1 V RMS |
|
INPUT CMRR |
: |
> 80 dB |
> 80 dB |
OUTPUT IMPEDANCE (@1 kHz) |
: |
< 0.02 Ohms |
< 0.02 Ohms |
VOLTAGE GAIN |
: |
60 (@ 4 Ohms) |
66.33 (@ 4 Ohms) |
INDICATORS |
: |
Power ON, Status Bar Graph - dual, Protection (common for DC fault, Thermal and overload) |
Power ON, Status Bar Graph - dual, Protection (common for DC fault, Thermal and overload) |
PROTECTIONS |
: |
Overload, DC fault, Thermal, Output Short circuit, Input Inrush current protection |
Overload, DC fault, Thermal, Output Short circuit, Input Inrush current protection |
| DIMENSIONS (H x W x D)mm |
: |
87 x 482 x 440 |
87 x 482 x 440 |
|
SHIPPING WEIGHT |
: |
13.5 Kg |
15 Kg |
|
|
