Products      Where to Buy      Product Support      Our Story      Contact Us
                       
                                         


Frequency Response 
:
 20Hz - 20kHz (+0,-3dB))
THD 
:
 < 0.1% @ 1kHz
Signal To Noise Ratio
:
> 90dB (all pots at centre position)
Crosstalk
:
> 70 dB
Tone Controls
BASS @ 100Hz
MID @ 1.6kHz
TREBLE @ 10kHz
:
+/- 12dB
+/- 12dB
+/- 12dB
Sensitivity
:
Mic Sens 4.36mV, -45dBu Imp 1k3ohm
(Trim in centre 0dB)
Line Sens 0.775V, 0dBu Imp >100k
RCA 200mV, -12dBu Imp 30kohm
Max. Level In
:
XLR mic -15dBu
line +30dBu
RCA >30dBu
Max. Level Out
:
+21dBu
Phantom Power
:
15 V DC
Outputs
Master Out

Mono Headphone Out

Mono Rec Out
:

Nominal Level 0dBu into 1kohm
Imp 100ohm
Nom -6dB into 200ohm
Imp 10ohm
Nom -12dB into 10kohm
Imp 10kohm
Power Input
:
AC: 230V/50Hz or 115V/60Hz,
3 pin IEC320-C14 connector; DC: 24 Volts via 2.1mmx5.5mm DC socket
Fuses
Mains (115V)
Mains (230V)
:
120 mA
63 mA
 Dimensions (HxWxD) mm
:
 44 x 482 x 182 (1.75“x19”x7.2”)
 Shipping Dimensions (HxWxD) mm
:
 90 x 505 x 270 (3.5“x19.9”x10.6”)
Weight
Net
Shipping
:
2.75kg (6.1lb)
3.75kg (8.3lb)


The Australian Monitor Installation Series MX61 mixer brings a range of new features to the AMIS standard 1 RU mixer range. The MX61 mixer features the new Australian Monitor Standard (AMS) input section which has an XLR input switchable between mic & line level, dual RCA line inputs, signal present LED indication, individually switchable phantom power, & +/- 15dB of gain trim available per input. The MX61 also boasts whisper quiet operation, 4 segment output level indication & balanced line output, record output & headphone outputs.
The MX61 has 6 AMS inputs to one output & will operate via 110 or 220-240 VAC or 24VDC via an external 24 volt power supply. Optional remote VCA volume control, tone generators & muting boards are also available for the MX61. The MX61 mixer is extremely versatile & represents excellent value for money.
      

     ·    6 input mono mixer
     ·     XLR input switchable between mic & line level
     ·    15dB +/- gain trim control per input
     ·    Input 1 is switchable to be pre/post master
     ·    24VDC or mains power operation
     ·    Optional remote VCA/Tone generator/Muting boards available
     ·    Whisper quiet operation
     ·    Dual colour signal present indication LED per input.