The Roarr 210 is front firing
powered subwoofer. A hefty 10" high excursion subwoofer transducer
housed in a solid MDF enclosure is powered by a true 150 watt rms
amplifier module. The result is tight, uncoloured bass that is
ideal not only for detail oriented music reproduction but also for
thunderous home theatre LF for large rooms. With LF extension down
to 28 Hz, and a maximum SPL of 112 dB, the Roarr 210 is an ideal
.1 companion for any high quality music or multichannel setup.
The 210 is also equipped with SS spikes (isolators) to
minimize cabinet vibrations, and due care has been taken to also
minimize electronic disortion and extraneous acoustical noises
(eg. port wind noise)
|
|
Description |
: |
Powered subwoofer |
|
System
|
: |
Front - firing vented subwoofer |
|
Cabinet Material
|
: |
18 mm MDF for front and 15mm MDF for other sides,
internally braced |
|
Drive Units
|
: |
1 x 10" polypropylene cone subwoofer
|
|
Frequency Response (±3dB)
|
: |
35Hz ~ Crossover Frequency |
|
Usable Frequency Resp ( -
10dB)
|
: |
28 Hz |
|
Subsonic Filter
|
: |
2nd order: 30 Hz |
|
Amplifier Power |
: |
150 watt before clipping |
|
Maximum SPL |
: |
112 dB |
|
Amplifier THD |
: |
Less than 0.05% at rated power |
|
Low Pass Filter |
: |
12 dB/octave-initial, (effected by variable crossover
frequency)
36 dB/ octave – ultimate, (fixed crossover at
200 Hz) |
|
LPF Type |
: |
Bessel |
|
Crossover Frequency |
: |
Continuously variable: 50 ~ 150 Hz |
|
Input Sensitivity at 70 Hz |
: |
100 mV/ 10K ohm |
|
Phase |
: |
Switchable: 0° and 180° |
|
Grille |
: |
Grey colour grill cloth stretched on single MDF wooden
frame |
|
Finish |
: |
Front- High gloss silver , other sides
beech |
|
Dimensions (HxWxD) mm |
: |
404 x 320 x 435 (without spikes) |
|
Net Weight |
: |
16 Kg |
|
Internal Volume |
: |
38 L |
|
