Products      Where to Buy      Product Support      Our Story      Contact Us

 

Description

:

 Stereo Integrated Amplifier
 with remote control
Inputs
:
 6 stereo line level inputs - Phono,
 Tuner, CD, AUX 1, Aux 2 & Tape
Outputs
:
 2 stereo line level outputs-
 Rec out & Pre out;
 2 stereo speaker outputs -
 A&B via gold-plated
 binding posts
Front Panel Switches
 :
 6 momentary switches for input selection; 1 momentary switch for power ON/ OFF; 2 push switches for speaker selection; 1 push switch for Stereo/ Mono
Front Panel Controls
:
 Volume, Bass, Treble,
 Mid and Balance
Remote Control Op.
:
 Input Selection, Power,
 Mute and Volume
Output at Clipping (1 kHz)  
:
 8 Ohm : 80 Watt rms, both channels  driven 4 Ohm : 100 Watt rms, both  channels driven
Distortion at Rated Power
:
 THD : Less than 0.05%;
 IMD : Less than 0.05%
Freq. Response (-3dB)
:
 15 Hz ~ 40 kHz
Phase Response
:
 0° - 15°, 20 Hz - 20 kHz
 (Tone controls at mid position)
  Slew Rate
 :
 20 V/ us
Damping Factor  
 :
 200 (8 Ohm, 1 kHz)
 Channel Separation
 :
 60 dB (1 kHz)
 Crosstalk
 :
 65 dB (1 kHz)
Sensitivity
 :
 Phono, RIAA- 5mV; Tuner, AUX,  Tape Mon- 150mV; CD - 250 mV
S/N Ratio
 :
 80 dB (A-weighted)
Input Impedance
 :
 47 kOhm (at all inputs)
Tone Controls
 :
 Bass: ± 10 dB at 100 Hz;
 Mid: ± 10 dB at 1 kHz;
 Treble: ± 10 dB at 10 kHz
Power Requirement
:
 230 V AC 50 Hz
Power Consumption
 
:
 350 VA Max.
Dimensions (hxwxd)
:
 (83 x 420 x 320) mm
Designed in keeping with the needs of the stereophile, the SA 8000 has excellent performance parameters, as shown in its impressive ratings of power, signal to noise ratio, harmonic distortion, and damping factor, among others. To prove how serious we were, for the vinyl lover, a RIAA equalized phono input is also present. The SA 8000 has a big heart ... that is, the torroidal transformer and is guaranteed to deliver oodless of power, and the option selecting upto two sets of speakers in stereo in stereo mode... we had fun designing this classic; we guarantee you will love listening to it!

Features
- 100 watt + 100 watt RMS (4 Ohm)
- Three way tone controls
- 5 inputs plus tape monitor facility (includes RIAA Phono input)
- Three way tone controls
- Speaker A, B, A + B
- Delayed on to avoid 'switch-on thump'
- Remote controlled input selection, volume, mute and power