Designed in keeping with the needs
of the stereophile, the SC 202R has excellent performance
parameters, as shown in its impressive ratings of, signal
to noise ratio and harmonic distortion among others. The
SC 202R serves as a controller not only for the power pack,
but also for a host of other amplification devices that
require a clean, uncoloured, pre amplified signal.
FEATURES
- Two way tone controls
- 3 inputs plus tape monitor facility
- Delayed on to avoid 'switch-on thump'
- Remote controlled input selection, level, mute &
power
- Dedicated five wire connection to the Power Pack
|
|
|
|
Description |
: |
Remote-controlled stereo preamplifier |
|
Inputs
|
: |
4
stereo line-level inputs – AUX1, AUX2, CD and TAPE MONITOR |
|
Outputs |
: |
2
stereo line level outputs – REC OUT, PRE OUT via RCA sockets
1 stereo line level out via 5 pin DIN socket (mates with model
POWER PACK) |
|
Front
Panel Switches |
: |
4
momentary (tact) switches for input selection, 2 momentary (tact)
switches for volume UP and DOWN, 1 momentary (tact) switch for
power ON/OFF |
|
Front
Panel Controls |
: |
Bass
and Treble (rotary type) |
|
Front
Panel indicators |
: |
4
LEDS for input selection, 2 LEDS for volume up and down,
1 LED for standby power, 1 LED for mute |
|
Remote
Control Operation |
: |
Input
selection buttons- (4 Nos) Volume UP & DOWN (2 Nos) Power
and Mute |
|
Remote
Control Range |
: |
Line
of sight – 50 ft.
+ 60° ~ 12 ft.
+ 75° ~ 9 ft. |
Sensitivity
(for 1V Output) CD
AUX1, AUX2, TAPE
|
: |
300
MV
150 MV |
|
Channel
Separation @ 1 kHz |
: |
60
dB |
|
Crosstalk @ 1 kHz |
: |
65
dB |
|
Frequency
Response (-3 dB) |
: |
15
Hz ~ 50 kHz |
|
Signal
to Noise Ratio |
: |
80
dB, A-weighted, re 1V |
|
THD |
: |
Better
than 0.05% |
Bass
Control
Treble Control
|
: |
+
6 dB at 100 Hz
+ 6 dB at 10 kHz |
|
Power
Requirement |
: |
230
V AC |
|
Power Consumption |
: |
20
V A Max |
|
Dimensions
(H x W x D) mm |
: |
50
x 216 x 187 |
|
