|
The SPA 202 is a
dual channel power amplifier that delivers enough power to
your speakers to have them stand up and deliver!
A
massive torroidal transformer and low noise op amps ensures
that the sound is virtually noise free. The large reservoir
capacitors provides ample headroom and generous usage of heat
sinks ensures that the amp runs cool! Both ins and outs are
gold plated and ensure excellent connectivity. On board
protections (with fault indicator) include thermal, DC at
output, overload, switch on - off surge, and current inrush. A
brushed aluminum facade gives it the classic hifi look that
makes it a deserving item on your mantlepiece.
With the
SPA 202 you will never fall short on power or dynamics. Use it
to power your mains, or better still, use 3 of them to power
your 6.1 home theatre system, and then sit back, and
enjoy!
| |
|
Description |
: |
Two channel power amplifier |
|
Inputs
|
: |
2 line level inputs via. gold plated RCA sockets
2
line level balanced inputs via. Female XLR
sockets |
|
Outputs |
: |
2 speaker outputs via gold plated binding
posts |
|
Front Panel Switches
|
: |
1 push type power switch |
|
Front Panel Indicators |
: |
Power ON, Fault/ Protection |
|
Output at Clipping: 8 Ohms
Output at Clipping: 4
Ohms |
:
: |
2 x 120 watts
2 x 200 watts |
|
Bridged mode power output
into
8ohms |
: |
400 watts, 4 ohms bridging not
recommended |
|
Distortion @ Rated Power
THD
IMD
|
:
|
Better than 0.05%
Better than
0.05%
|
|
Freq Response (-3dB) |
: |
15 Hz ~ 80 kHz |
|
Slew Rate |
: |
40 V /uS |
|
Damping Factor |
: |
> 150 (8 Ohms) 1 kHz |
|
Channel Separation (1 kHz)
|
: |
Better than 70 dB |
|
Sensitivity |
: |
775 mv (at rated power, 8
ohms) |
|
S/N Ratio unweighted |
: |
105 dB |
|
Input
Impedance |
: |
30 Kohms balanced,
4.7 Kohms
unbalanced |
|
Power Requirement
|
: |
230 V AC 50 Hz |
|
Power Consumption |
: |
575 VA max. |
|
Dimensions (H x W x D)
mm |
: |
107 x 440 x 400 max |
|
Net Weight |
: |
11.5 Kg
| |
