|
|
|
Description
|
: |
Remote controlled powered
subwoofer |
|
System
|
: |
Front firing firing, vented
subwoofer |
|
Freq.
Response
(-6dB)
|
: |
35 Hz ~ Crossover Frequency
|
|
Useable Frequency Response
(-10dB) |
: |
32 Hz |
|
Drive Units |
: |
1 x 10" subwoofer |
|
Subsonic Filter |
: |
2nd Order, 35Hz |
|
Amplifier Power |
: |
150 Watt before clipping |
|
Input Sensitivity at 70Hz |
: |
100 mV/ 10 kOhm |
|
Maximum SPL |
: |
112 dB |
|
Amplifier THD |
: |
<0.05% at Rated Power |
|
Low Pass Filter |
: |
12dB/Octave- initial (effected by
variable crossover frequency)
36dB/Octave-
ultimate (Fixed
crossover at 200Hz) |
|
Low Pass Filter Type |
: |
Bessel |
|
Crossover Frequency |
: |
Continuously
variable: 40 ~120 Hz |
|
Drive Units |
: |
1x 10”
subwoofer |
|
Phase Control |
: |
Continuously
variable: 0 to 180 degrees |
|
Inputs |
: |
1 balanced
input via 0.25" TRS socket on rear panel, 2 unbalanced
inputs via RCA sockets on rear panel
* |
|
Front Panel Controls |
: |
2 tact switches
for Voume Up/Down, One rotary control for varying
frequency, one rotary control for varying phase
|
|
Remote Control |
: |
Power on/off,
Volume control in 1dB steps, Mode selection (music/
movie), Mute |
|
Finish |
: |
Black painted |
|
Power Requirement |
: |
230 VAC, + 10/- %, 50
Hz |
|
Power Consumption |
: |
270 VA Max. |
|
Dimensions (hxwxd) mm |
: |
404 x 320 x 468 |
|
Net Weight |
: |
19.8 Kg |
* Please note: For
SLF 200Ai, both inputs are balanced
AV MAX Review
: September
2006 |
The SLF meets the .1 channel need most effectively. A
high excursion 10" subwoofer device with LF extension to 28
Hz makes it an ideal mate to the SM. Variable phase, corner
frequency, and level are displayed on the baffle, with level
and power on the remote. A 'movie' mode electronically
enhances critical frequencies required for .1 channel
monitoring.
| |
|
