Products      Where to Buy      Product Support      Our Story      Contact Us
                       
                                         


        
              · Remote Master VCA Control - new feature!

              · XLR Balanced Output

              · Phantom Power (defeatable) 18V

              · Master Gain Control

              · Tape output & Headphone Output

              · AC/DC Operation

              · Rack Mountable (1RU)

              · Optional single (Tx3010) or dual (Tx3014) muting/ducking

              · Optional Tone Generator (ATC5488)

              · 6 Balanced Mic/ Line Inputs, 2 dedicated mic inputs

              · Treble and Bass per channel
Frequency Response
:
40 Hz - 15 kHz (± 3 dB)
THD
:
Less than 0.05% @ 1 kHz
Signal To Noise Ratio
:
-76 dB (all channels at centre position)
Tone Controls
:
Bass@100Hz, Boost +12dB, Cut -12 dB Treble@10kHz, Boost +12dB, Cut -12dB
Inputs
:
8 inputs, 6 of which are dual mic/line. The mic inputs are active balanced  with 3 pin XLR female sockets (200   Ohm). Max. Input level is 300mV. The line inputs are dual RCAs (47kOhm). The last 2 inputs are balanced mic only.
Input Sensitivity
:
Mic: 0.6mV@200 Ohm; Line: 50mV @ 47K Ohms
Phantom Power
:
18V DC available on all mic channels (overall internal on-off link)
Outputs
:
Master Output, 3 pin XLR male socket. (1.5V @ 600 Ohm). Max. Output   Level: +20dB. Mono Headphone Output, 1/4” socket (1.5V @ 600  Ohm). Mono Tape Output, dual RCA connectors. (700mV @ 10kOhm)
Controls
:
Level Control per channel, Internal Trim Control per channel, Recessed Treble & Bass controls per channel, Master Level Control
Indicators
:
Power “on” LED, 7 segment LED meter on master output
Power Sources
:
 AC: 240V - 50Hz or 110V - 60Hz (special order), 3 pin IEC connector; DC: 24 Volts
Power Consumption)
:
 7 vA
 Dimensions (HxWxD) mm
:
 44 x 482 x 250
 Weight
:
 3 Kg