Products      Where to Buy      Product Support      Our Story      Contact Us
                       

                                         


       
            · 6 Balanced Mic/ Line Inputs, 2 Stereo Line Inputs

            · Stereo Output & Tape Output

            · Remote Master VCA Control - new feature!

            · Treble, Bass & Pan per channel

            · Phantom Power (defeatable) 15V

            · Direct TRS output for 6 channels

            · Master Gain Control

            · Dual LED VU Meters & AC Operation

            · Rack Mountable (1RU)

            · In-built two stage muting/ducking

            · In-built Tone Generator - pre announce/EVAC/alert/bell
Frequency Response
  
:
50 Hz - 15 kHz (± 3dB)
THD
:
Less than 0.01% @ 1 kHz
Signal To Noise Ratio
:
-74 dB (all channels at centre  position)
Tone Controls
:
Bass@100Hz, Boost +12dB, Cut -12dB; Treble@10kHz, Boost +10dB, Cut -10dB
Inputs
:
6 active balanced mic/line inputs with 3 pin XLR female sockets (200 Ohm). 2 stereo line inputs with dual RCAs (47kOhm). Max. Input Level is 1.5V
Input Sensitivity
:
Mic: 1mV @ 200 Ohm
Phantom Power
:
15V DC on all mic channels (switchable individually)
Outputs
:
L & R Master Outputs, 3 pin XLR male sockets (1.5V @ 600Ohm). Max. Output level: +20dB Stereo headphone Output, 1/4” stereo socket (3.0V @ 600Ohm)
Stereo Tape Output, dual RCA connectors (500mV@ 10kOhm). 6 direct line level outputs (1.5V 10kOhm)
Controls
:
Level Control per ch., Recessed  Treble, Bass & Pan controls per  channel, L&R Master Level controls
Indicators
:
Power “on” blue LED, 7 segment LED meters for both L & R outputs
Power Sources
:
 AC: 240V - 50Hz or 110V - 60Hz (special order), 3 pin IEC connector  
Power Consumption
:
 7 W
 Dimensions (HxWxD) mm
:
 44 x 482 x 250
 Weight
:
  4 Kg