Products      Where to Buy      Product Support      Our Story      Contact Us
                            
LETS SPLIT (L) REAR & FRONT PANEL


LETS SPLIT (M) REAR & FRONT PANEL




JUICED UP REAR & FRONT PANEL




PRE ME REAR & FRONT PANEL








MULTI CAN REAR & FRONT PANEL




GET UP REAR & FRONT PANEL




THE INJECTOR REAR & FRONT PANEL




BUZZ OFF REAR & FRONT PANEL




GET DOWN REAR & FRONT PANEL




DROP ME REAR & FRONT PANEL




MIXED UP REAR & FRONT PANEL



Let's Split (L) - Line Splitter
The AMIS LETS SPLIT (L) is a balanced line level splitter with a balanced XLR line level input which provides both a transformer balanced XLR output and a thru (direct) XLR output of the input signal. The LETS SPLIT (L) also provides a ground lift switch to eliminate ground loop hum.




Let's Split (M) - Mic Splitter

The AMIS LETS SPLIT (M) is a balanced mic level splitter with a balanced XLR mic level input which provides both a transformer balanced XLR output and a thru (direct) XLR output of the input signal. The LETS SPLIT (M) also provides a ground lift switch to eliminate ground loop hum.


Juiced Up - Dual Phantom Power Supply
The AMIS JUICED UP is a 2 channel phantom power supply that features balanced XLR inputs and outputs per channel. The JUICED UP can operate via the supplied external power supply or via two on-board 9 volt batteries, selectable via a rear panel slider switch. The JUICED UP will supply 12VDC phantom power from battery power and 40VDC phantom power from an external power supply.


Pre Me - Microphone pre-amplifier
Microphone pre amplifier. The AMIS PRE ME is a compact yet highly featured microphone pre amplifier. The PRE ME features dual RCA line input and a balanced XLR input switchable between mic and line level. The PRE ME also offers +40VDC phantom power, switchable High Pass Filter and balanced XLR output. A front panel gain control and dual colour signal present LED are also offered for ease of set-up and operation.





Multi Can - 4 channel headphone amplifer
The AMIS MULTI CAN is a compact yet high-quality 4 channel headphone amplifier, featuring 6.35mm TRS, dual RCA and dual XLR stereo inputs and 6.35mm TRS headphone outputs. The MULTI CAN also offers individual output level controls per channel.




Get Up - Stereo Converter
The AMIS GET UP stereo converter converts an unbalanced domestic level signal to a professional line level balanced audio signal. Inputs are stereo RCA connectors and outputs are balanced XLRs. The GET UP also features a front panel level control for achieving the optimal output level.




The Injector - Passive DI
The AMIS THE INJECTOR is a passive direct injection box which offers a 6.35mm input and 6.35mm thru output (direct) and a balanced
XLR output. The INJECTOR also features ground lift switching for elimination of hum and a three stage pad offering up to 40dB of attenuation.




Buzz Off - Dual channel hum eliminator
The AMIS BUZZ OFF is a two channel hum eliminator featuring both balanced XLR inputs and outputs and unbalanced RCA inputs and outputs per channel. The BUZZ OFF is ideal or getting rid of hum and extraneous noise from long cable runs.





Get Down - Stereo Converter
The AMIS GET DOWN stereo converter converts a professional line level balanced audio signal to an unbalanced domestic level signal. Inputs are balanced XLRs and outputs are stereo RCA connectors. The GET DOWN also features a front panel level control for achieving the optimal output level.



Drop Me - 100 Volt Line Converter
The AMIS DROP ME allows you to convert a 100 volt line amplifier speaker output signal to a balanced line level signal. The 100 volt line level signal input is via phoenix connector and the output is balanced XLR. The DROP ME also features a rear panel level control for achieving the optimal output level.



Mixed Up - 4 Channel passive mixer.
The AMIS MIXED UP is a passive 4 channel mixer which features 2 balanced XLR mic inputs and 2 dual RCA line inputs and a single balanced XLR output. The MIXED UP also offers individual front panel level controls per input.



Frequency Response: 10Hz – 20kHz
THD: <0.005%
Output impedance : 490 Ohms
Max Input at 1kHz : >+30dBu
Max Input at 50Hz : >+20dBu






Frequency Response: 10Hz – 60kHz
THD: <0.005%
Output impedance: 110 Ohms
Max Input at 1kHz: >+30dBu
Max Input at 50Hz: >+4dBu




Frequency Response: 50Hz – 77kHz
Phantom Power: +40V
Max Current: 10mA








Frequency Response: 80Hz – 30kHz
THD: <0.3%
Noise + Hum: <-90dBu
Mic Max Input: -10dBu
Line Max Input: +16dBu
RCA Max Input.: +24dBu
Phantom Power: 40V
Mic Gain: +39dB
Line Gain: +5.5dB
RCA Gain: +5.5dB
Max Out: +8dBu
Output Impedance: 200 Ohms
Mic Input impedance: 1k5 Ohms
Line Input Impedance: 27k5 Ohms
RCA Input Impedance : 29k Ohms

Frequency Response: 10Hz – 29kHz
THD: <0.03%
Output impedance: 100 Ohms
Max Output Power: 7.5mW
Noise + Hum: -75dBu
Stereo seperation: -63dB





Frequency Response: 35Hz – 70kHz
THD: <0.02%
Noise + Hum: <-74dBu
Max Input: +30dBu
Stereo seperation: 70dB
Gain (Max: +20dB






Frequency Response: 10Hz – 80kHz
THD: <0.07% at +30dBu
Output impedance: 250 Ohms







Frequency Response: 10Hz – 80kHz
THD: <0.006%
Output impedance: 500 Ohms
Max Input at 1kHz: >+30dBu
Max Input at 50Hz: >+20dBu







Frequency Response: 10Hz – 100kHz
THD: <0.005%
Noise + Hum.: <-95dBu
Max Input: +22dBu
Stereo seperation: 80dB
Gain (Max): -6dB





Frequency Response: 10Hz – 40kHz
THD: <0.005%










Frequency Response: 10Hz – 60kHz
THD: <0.005%




Common Specifications for all
Weight : 1 Kg
Shipping Dim. (mm): 250x125x55
Shipping Weight : 2 Kg